SATIN and THICK VARNISH BC Heat Set - Especially Designed for Reborning - 10 gram Jar
Varnish with a slightly more satin finish than Mate BC varnish.
Satin finish similar to real skin, since it imitates the luminosity of the baby's skin without lowering the color of our work, dulling it, not having a talcum effect or cracking with handling.
The BC Varnishes have mixtures of two different resins, one that adds fixation and mattifying, and another of them provides extraordinary flexibility, which means that there are no whitish effects or that this final layer can break.
The Matte and Satin Perfect Texture varnishes cure quickly in the air, so it is VERY advisable to follow the instructions for use that can be seen here: https://www.youtube.com/watch?v=DQyI_lA6zrg&t=180s
Although BC Heat Set clearcoats are air cured, they WILL NOT SET until after firing and COOL THOROUGHLY. For greater ease of work, dilute the varnish in a separate container with a few drops of WATER until you get a suitable texture for your work.
MOVE WELL until you get a perfect mix. FOR A MORE TEXTURED FINISH, apply the varnish undiluted in small areas. It is advisable to work in small areas and move on to the next one in order to control air curing. Whitish effects between zones will disappear after firing. It is advisable to use clean sponges for each application.
WORK ONLY while the clearcoat is wet on the vinyl, so it is important to work in small areas.
Curing temperature: 130ºC (266ºF) for 9 minutes (it is advisable to bake both sides of the vinyl)
YOU MAY NEED TO CHANGE THE SPONGE in the process to avoid debris.
KEEP THE JAR CLOSED for proper product preservation as it can cure with prolonged contact with air. It is recommended to always keep the varnish moist to avoid air curing.
BC products require proper storing in PET/PETG or Glass containers.
Do not expose to temperatures of extreme cold or frost, as it could be damaged.
Do not expose to direct sunlight, keep in a cool place.
Cleaning brushes and sponges with soap and water No phthalates, heavy metals or formaldehyde.
* Please Note: Satin and Thick Varnish Can Only Be Diluted with a Little Water (no other product).
------------------------------------------------------------------------------------
-
- To make these paints more affordable, DBS repacks them in 10 gram Jars. (PET/PETG- Paint Safe Jars)
- Each jar is filled with 100% BC Heat Set Paint
- The amount can vary due to the consistency of the paint colors.
- Overfilling the jar can cause leakage of the oils in the paints. (Both in Shipping and Storage)
*******************************************
(PLEASE NOTE - We do not accept Returns or Exchanges on any Paints.)
*****************************************
.jpg)
