Breathing Mechanism - The New Newborn Silent Breather will suit dolls size: 19″ – 20″.
From Nikki Holland of "Still Moments Nursery" in Australia
Have you ever wanted your reborn doll, fantasy doll or even your favorite teddy bear to breath…
Well now you can. With our breathing mechanism you can now make your baby breathe realistically. The breather resembles a baby breathing at around 25-30 bpm.(Breathing Motion Only - NO SOUND)
All breathers include a USB Rechargeable Battery Pack, that is molded to perfectly fit into the dolls nappy/diaper, without being felt.
Our Breather can be used in not only reborn dolls but teddy bears, fantasy dolls, fairies, Unicorn and anything you want to bring to life.
See "Momma Star's Dolls" Video about the "Breathing Box"
V3 Breathing Mechanism (Breathing Motion Only - NO SOUND)
- Remote Control Operation “Red on/off Button Removed”
- Further improvements to ergonomics
What’s included:
- Breathing Mechanism ( Size: 111mm x 79mm x 50mm )
- Remote Control (CR2025 battery required, not included)
- USB Rechargeable Battery Pack
- USB Charge Cable
- Stocking (pre installed)- Please Don’t Remove Stocking
Bring your reborn dolls to life, with your very own Silent Newborn Breathing Mechanism for your reborn dolls.
Our New Silent Newborn Breathing Mechanism simulates a real baby breathing and can be easily seen and felt when your hand is gently resting on the chest.
Each silent breathing mechanism is hand made in Australia, using quality local and imported products.
How to use your breathing mechanism:
- Connect your battery to the breathing mechanism’s Micro USB connector. Be sure the Micro USB connector is in the correct orientation.
- Pressing the OK button on the remote control will activate and de-activate your breather.
- After 20mins your breather will turn itself off to save energy. Press the OK button on the remote control twice to restart.
- Prepare your body by adding on the USB body clip provided – Using the template, cut a hole in the lower back of your body and then insert the male outer part of the USB body clip.
- Insert your fluffing (polyfil) and weighting sack into the lower part of the body.
- Then insert your breathing mechanism into the body on top of the weighting sack and push the cable through the inner USB clip attachment.
- Add enough fluffing around the breathing mechanism so that it covers the breather evenly all round, more fluffing is recommended at the back of the breather, to help push it forward so it can be seen more easily from the front / chest.
- You’re now ready to assemble the doll.
- Screw the inner female and outer male USB clips together with the USB cable going through the clip and out from the back of the body.
- Now you can simply slip the USB battery pack into the nappy where it wont be felt or seen, and connect your breather.
Rechargeable Battery Packs:
Your Breather includes a rechargeable USB battery pack & USB charger.
How to recharge your battery pack:
- Using the USB cable provided in your protective box, connect the smaller connector to the battery pack.
- Connect the opposite larger end of the USB cable to any USB wall charger (standard phone style charger)
- or a powered USB port (a computer/laptop etc.
- Allow your battery pack to charge for 4-6 HRS.
- ------------------------------------------------------------------------------------------------------------------
Related Video:
Reborn Breather V3 inside a full vinyl torso
**************
WARNING – Keep batteries out of reach of children.
Product requires a Button or Coin cell battery (CR2025) NOT INCLUDED (due to shipping restrictions)
The Battery can cause severe or fatal injuries in 2 hours or less if it is swallowed or placed inside any part of the body.
